Titanium for Marine & Subsea Engineering
Titanium forms a stable, self-healing oxide film that resists pitting and crevice corrosion in natural seawater. Through our certified partner facilities, we supply both mill products and build-to-print CNC-machined subsea pressure housings, heat exchanger tubing, offshore piping spools, and marine fasteners.
Market Insight
Middle East desalination programmes are widely reported as committing over $25B to new capacity by 2028, driving sustained demand for ASTM B338 titanium condenser tubing alongside deepwater ROV hardware.
Common Titanium Grades
| Grade | Typical Use | View Grade |
|---|---|---|
| Grade 2 (CP Ti / UNS R50400 / 3.7035) | Seawater heat exchangers, condensers, ballast piping, and hull fittings (ASTM B338 / B861 / B363) | View → |
| Grade 5 (Ti-6Al-4V / UNS R56400 / 3.7165) | ROV/AUV deep-sea instrument pressure housings, thruster shafts, and high-strength marine fasteners | View → |
| Grade 7 (UNS R52400) & Grade 12 (UNS R53400) | Elevated-temperature brine crevices, desalination evaporators, and sour offshore service | View → |
Marine & Subsea Supply Matrix: Machined Hardware & Mill Products
From deepwater ROV pressure vessels to desalination tube bundles, we supply both raw mill stock and build-to-print machined components in metric and imperial dimensions:
| Marine / Subsea Assembly | Recommended Grade | Size Range (Metric / Imperial) & Route | Subsea & Offshore Advantage |
|---|---|---|---|
| Subsea Instrument & ROV Pressure Housings | Grade 5 (Ti-6Al-4V / 3.7165) | Ø50–300 mm (2.0"–11.8") Forged Bar / Hollow Billet + CNC Turning & O-Ring Groove Boring CNC Machining Service → | High collapse-depth-to-weight ratio with zero seawater pitting on precision radial and face O-ring grooves |
| Seawater Heat Exchanger & Condenser Tubing | Grade 2 (UNS R50400 / 3.7035) | OD 19.05–50.8 mm (0.75"–2.0"), Wall 0.7–2.0 mm (0.028"–0.079") per ASTM B338 Titanium Tubes → | Eddy-current and ultrasonic tested tubing for multi-stage desalination and shipboard cooling |
| Offshore Process Piping, Flanges & Butt-Weld Fittings | Grade 2 & Grade 12 (3.7105) | NPS 1/2"–12" (DN15–DN300) Pipe per ASTM B861/B862, ASME B16.5 Flanges & B363 Elbows/Tees Titanium Pipes & Fittings → | Eliminates corrosion allowance and coating maintenance in splash-zone, bilge, and firewater lines |
| Deck, Hull & Subsea Frame Fasteners | Grade 5 & Grade 2 | M6–M36 (1/4"–1-1/2") Hex Bolts, Double-End Studs & Socket Cap Screws Titanium Fasteners → | Non-magnetic and resistant to chloride stress-corrosion cracking in immersed and atmospheric service |
Seawater Material Comparison: Titanium (Gr2 / Gr5) vs. Super Duplex 2507 vs. 316L Stainless
Why subsea equipment designers and offshore engineers specify titanium over stainless alloys in seawater service:
| Engineering Property | Titanium (Grade 2 / Grade 5) | Super Duplex (UNS S32750 / 2507) | 316L Stainless Steel |
|---|---|---|---|
| Density | 4.51 / 4.43 g/cm³ (High buoyancy efficiency) | 7.80 g/cm³ | 8.00 g/cm³ |
| Natural Seawater Pitting & Crevice Resistance | Resistant in ambient seawater (Gr7/Gr12 for hot brine) | High PREN (>40), subject to critical crevice temp limits | Susceptible to localized pitting in stagnant seawater |
| Yield Strength (Rp0.2) | 275 MPa (Gr2) / ≥828 MPa (Gr5) | ≥550 MPa | ≥170 MPa |
| Subsea Housing Weight Penalty | Optimal payload-to-displacement for ROVs & AUVs | Heavy wall mass reduces vehicle payload | Low yield strength requires thick, heavy walls |
Key Requirements
- Resistance to pitting and crevice corrosion in natural seawater and chloride splash zones
- Precision CNC turning and boring for subsea O-ring sealing faces on ROV and sensor housings
- NACE MR0175 / ISO 15156 compliance for sour offshore oil and gas environments
- Full heat-lot traceability with Material Test Certificate (MTC) and third-party inspection support
Common Product Forms
Need Titanium for Marine & Subsea Engineering?
Tell us your application requirements, target grade, and quantity. We will provide a competitive quote with Material Test Certificate (MTC) and heat-lot traceability.
Request a Quote →Related Tools
Explore Other Industries
CNC Machine Shops & Job Shops
Stop burning spindle hours squaring raw mill plate or fighting guide-bushing seizure on oversize bars. Through our certified partner facilities, we supply 6-side milled and surface-ground titanium blanks, ISO 286-2 unilateral negative tolerance (h6–h9) centerless-ground bar stock, and cold waterjet near-net profiles — cut to your exact machining allowance in metric (mm) or imperial (in) dimensions.
Motorsport & Exhaust Fabrication
Purpose-built titanium tubing and hardware for race exhaust fabricators, performance tuning shops, and motorsport constructors. We supply thin-wall CP Grade 1 and Grade 2 exhaust tubes, precision laser-cut pie cuts, and CNC-machined O2 sensor bungs, V-band flanges, and hangers — ultrasonically cleaned and individually sealed so fabricators can tack and TIG weld straight out of the bag.
Knife Making & EDC Hardware
Precision titanium sheet, bar, and pre-cut blanks for custom folder makers, production knife OEMs, and everyday-carry (EDC) tool manufacturers. We supply double-side surface-ground Grade 5 (Ti-6Al-4V) scale and frame-lock stock, cold waterjet near-net handle blanks, and CNC-turned pivot hardware — with optional rolling grain direction marking and single heat-lot fulfillment for uniform voltage anodizing.
Medical Devices & Implants
Titanium's biocompatibility makes it the gold standard for orthopedic implants, spinal fixation, and dental implants. Grade 23 (Ti-6Al-4V ELI) per ASTM F136 is the most widely used medical titanium.
Chemical Processing
Titanium equipment lasts decades in aggressive chemical environments where stainless steel fails within months. The lifecycle cost advantage is decisive.
Automotive & Motorsport
High-performance vehicles use titanium for suspension links, connecting rods, valve springs, exhaust components, and chassis fasteners — anywhere unsprung and rotating weight savings directly translate to lap-time reduction.
3D Printing & Additive Manufacturing
Titanium powder for additive manufacturing is the fastest-growing segment. Grade 5 spherical powder for LPBF and WAAM enables complex geometries impossible with traditional machining.
Energy & Oil/Gas
From offshore risers to hydrogen electrolyzers, titanium serves the energy industry in its most corrosive and high-pressure environments.
Humanoid Robotics & Embodied AI
As humanoid robots transition from laboratory prototypes to factory-floor deployment, dynamic payload-to-weight ratio and joint fatigue life become the ultimate engineering bottlenecks. Replacing 7075-T6 aluminum in high-torque rotary actuators, knee/hip load-bearing frames, and dexterous hand linkages with Grade 5 (Ti-6Al-4V), Grade 23 ELI, and high-strength beta-titanium alloys delivers 3x higher fatigue endurance and 55% volume reduction without sacrificing structural stiffness.