Type something to search...
📊

Titanium Material Comparison

Compare two titanium grades side by side — tensile strength, yield, elongation, density, and application suitability.

Compare mechanical properties, specific strength (strength-to-weight ratio), elastic modulus, thermal conductivity, chloride corrosion immunity, and lifecycle cost across Titanium Grade 2, Grade 5 (Ti-6Al-4V), 316L Stainless Steel, 7075-T6 Aluminum, and Nickel superalloys.

PropertyGrade 2Grade 5
TypeCommercially Pureα+β Alloy (Ti-6Al-4V)
Density(g/cm³)4.514.43▲
Tensile Strength (max)(MPa)4501000▲
Tensile Strength (min)(MPa)345895▲
Yield Strength (max)(MPa)410910▲
Yield Strength (min)(MPa)275828▲
Elongation(%)20▲10
Elastic Modulus(GPa)103114▲
Hardness(HB)200334▲
Melting Point(°C)1665▲1660
Applications
chemical processingmarineheat exchangersdesalination
aerospace structuresengine componentslanding gearmedical implantsmarine

Green highlight indicates the superior value for that property

Need Help Choosing? Let Our Engineers Advise You →

Engineering Guidelines for Material Trade-Off Analysis

1. Specific Strength vs. Stiffness: Titanium Grade 5 has a density of 4.43 g/cm³—roughly 44% lighter than 316L steel (7.99 g/cm³) and 47% lighter than Inconel 625 (8.44 g/cm³)—while delivering 895–1000 MPa tensile strength. However, titanium's elastic modulus (~110–114 GPa) is roughly half that of steel (200 GPa), so deflection-critical beams may require slightly increased section moment of inertia.

2. Thermal Limit vs. Aluminum & Superalloys: Aerospace aluminum 7075-T6 loses strength rapidly above 120°C due to over-aging, whereas Ti-6Al-4V maintains structural integrity up to 350–400°C. Above 450°C in continuous air exposure, titanium absorbs oxygen (alpha-case embrittlement), making Inconel 625 or 718 the preferred choice for hot turbine sections.

3. Lifecycle Cost in Seawater & Chlorides: Although titanium mill stock costs more per kg than 316L or duplex stainless steel, its lower density means 1 kg of titanium yields ~1.8x the surface area or part volume of steel, and its zero-pitting service life in seawater eliminates mid-life retubing shutdowns.

Need Exact Mill Pricing or Custom Machining per Drawing?

Send your dimensions or CAD files (STEP, DXF, PDF) for a formal FOB/CIF quote within 24 hours.

Engineering & Procurement FAQ

How does Titanium Grade 5 compare to 316L Stainless Steel in strength and weight?
Titanium Grade 5 (Ti-6Al-4V) offers nearly double the tensile strength (895–1000 MPa vs. 485–560 MPa) and more than triple the yield strength (828+ MPa vs. 170–290 MPa) of annealed 316L stainless steel while weighing 44% less (4.43 g/cm³ vs. 7.99 g/cm³). Additionally, titanium is immune to chloride pitting and stress corrosion cracking (SCC) in marine environments where 316L fails.
When should engineers choose Titanium Grade 5 over 7075-T6 Aluminum?
Choose Titanium Grade 5 when operating temperatures exceed 120°C, when galvanic corrosion with carbon fiber composites (CFRP) must be avoided, when high-cycle fatigue endurance (>10^7 cycles) is critical, or when tight geometric packaging prevents using bulky aluminum cross-sections.
How does Titanium compare to Inconel 625 for chemical and offshore service?
Both materials offer exceptional seawater and oxidizing chloride resistance, but Titanium Grade 2 and Grade 5 weigh nearly half as much as Inconel 625 (4.43–4.51 g/cm³ vs. 8.44 g/cm³) and cost significantly less per cubic centimeter of finished part. Inconel 625 is preferred when service temperatures exceed 400°C or in concentrated reducing acids where titanium's passive TiO2 film cannot self-heal.

Ready to Start Your Project?

Send your drawing or specification and we will reply within 24 hours.

Get a Quote
Quick Inquiry
WhatsApp