Find answers to the most common questions about titanium materials, ordering, and our services.
Grades & Material Selection
What is the difference between Grade 2 and Grade 5 titanium?
Grade 2 is a commercially pure (CP) titanium with excellent corrosion resistance and good formability, commonly used in chemical processing and marine applications. Grade 5 (Ti-6Al-4V) is an alpha-beta alloy offering roughly double the tensile strength of Grade 2, making it the go-to choice for aerospace, medical implants, and high-performance engineering.
What is Ti-6Al-4V and why is it so popular?
Ti-6Al-4V is the designation for Grade 5 titanium, containing 6% aluminum and 4% vanadium. It accounts for over 50% of all titanium usage worldwide due to its outstanding strength-to-weight ratio, corrosion resistance, and biocompatibility. It is widely specified in aerospace structural components, surgical implants, and marine hardware.
Which titanium grade is best for seawater applications?
Grade 2 is the most cost-effective choice for seawater service, offering excellent resistance to chloride-induced corrosion. For higher-strength marine applications, Grade 5 or Grade 9 (Ti-3Al-2.5V) are commonly specified. In extreme environments such as hot brine or offshore oil and gas, Grade 7 or Grade 12 with palladium or molybdenum additions may be required.
What does "ELI" mean in Grade 23 (Ti-6Al-4V ELI)?
ELI stands for "Extra Low Interstitials," meaning the oxygen, nitrogen, carbon, and iron contents are held to tighter limits than standard Grade 5. This results in superior fracture toughness, better ductility, and improved fatigue life. Grade 23 ELI is the primary titanium alloy used for orthopedic and dental implants due to its enhanced biocompatibility.
What is the difference between CP titanium and titanium alloys?
Commercially Pure (CP) titanium — Grades 1 through 4 — contains 99%+ titanium with varying oxygen levels that control strength. Titanium alloys add elements like aluminum, vanadium, or molybdenum to significantly increase strength and high-temperature performance. CP grades are chosen for corrosion resistance and formability, while alloys like Grade 5 are selected when higher mechanical properties are required.
How do I choose the right titanium grade for my project?
The selection depends on your application environment, required mechanical properties, and budget. For general corrosion resistance, CP Grade 2 is the most widely used. For high-strength structural parts, Grade 5 is the standard. We recommend sharing your working conditions, temperature range, and load requirements with our engineering team — contact us for a free material consultation.
Specifications & Standards
What is ASTM B265?
ASTM B265 is the standard specification for titanium and titanium alloy strip, sheet, and plate. It covers all commercially pure grades (1–4) and common alloys including Ti-6Al-4V. Most of our titanium sheet and plate products are supplied to this specification with full mill certification.
What is the difference between ASTM B348 and AMS 4928?
ASTM B348 is the standard specification for titanium bars and billets used in general industrial applications. AMS 4928 is an aerospace material specification for Ti-6Al-4V bars, forgings, and rings with stricter requirements on chemistry, mechanical testing, and traceability. We supply to both specifications depending on your industry requirements.
What certifications does your titanium come with?
Every shipment includes a packing list and a material test certificate (MTC), reporting chemical composition and mechanical properties. We can also provide material certificates per ASTM/AMS standards and arrange independent third-party re-testing on request.
What is a Mill Test Certificate (MTC)?
A Mill Test Certificate (also called Mill Cert or MTC) is a quality document issued by the producing mill that certifies the chemical analysis and mechanical test results of a specific heat or lot.
Do you provide third-party inspection reports?
Yes, independent third-party re-testing can be arranged on request. This can include dimensional verification, chemical re-analysis, mechanical re-testing, and visual inspection. Third-party inspection is available upon request and the cost is typically borne by the buyer.
Pricing & Ordering
How much does titanium cost per kg?
Titanium pricing varies significantly depending on the grade, product form, dimensions, quantity, and current raw material market conditions. CP Grade 2 is generally the most economical, while aerospace-grade alloys command a premium. Request a quote with your specific requirements for accurate pricing.
What is your minimum order quantity?
Through our partner network, small quantities can ship from stock where available. A real minimum applies only where a partner facility has to run for you: custom melting, a specific rolling schedule, a non-stock size or a forging die. In that case we state the actual minimum and the reason rather than quoting a small quantity and renegotiating later. See our page on prototype and low-volume orders. We are flexible and work with customers to find solutions for both small prototype orders and large-volume procurement.
How long does it take to get a quote?
We typically respond to quote requests within 24 hours during business days. For standard products in stock, we can often provide pricing within a few hours. Complex custom orders or specifications requiring mill consultation may take 2–3 business days. Submit your inquiry and we will respond as quickly as possible.
Do you accept custom sizes and specifications?
Yes, custom manufacturing is one of our core strengths. We can produce titanium products to your exact dimensions, tolerances, and specifications. This includes custom sheet/plate cutting, bar turning, tube drawing, and forging to drawing. Share your drawings or specifications with us for a tailored quotation.
What payment terms do you offer?
We accept T/T (telegraphic transfer) as our standard payment method. For new customers, we typically require 30% deposit with the balance paid before shipment. Established customers may qualify for more flexible terms. We also accept L/C (Letter of Credit) for larger orders.
Machining & Processing
Is titanium difficult to machine?
Titanium can be machined successfully with proper tooling and techniques, but it does require more care than steel or aluminum. Key factors include using sharp carbide tools, maintaining low cutting speeds with high feed rates, ensuring adequate coolant flow, and avoiding dwell time. Titanium work is placed only with manufacturing resources dedicated to titanium rather than general job shops, and process route and tooling strategy are agreed before release.
Can titanium be welded?
Yes, titanium is readily weldable using TIG (GTAW) and electron beam welding processes. The critical requirement is complete shielding from atmospheric contamination — the weld zone, heat-affected zone, and back side must be protected with inert gas (argon or helium) until cooled below approximately 800°F (427°C). We can supply titanium welding wire and offer technical guidance on welding procedures.
What surface finishes are available?
We offer a range of surface finishes including mill finish (as-rolled or as-forged), pickled and annealed, ground, polished, and blasted. For bars, we provide hot-rolled, cold-drawn, centerless ground, and polished finishes. Specific surface roughness requirements (Ra values) can be met upon request.
Do you offer cut-to-length services?
Yes, we provide cut-to-length services for titanium bars, plates, and sheets. Cutting methods include band-saw cutting, laser cutting and water-jet cutting, selected according to material form, thickness and the edge condition you need. This helps reduce your material waste and machining time.
Can you do CNC machining on titanium parts?
Yes, we offer CNC machining services for titanium components, placed with qualified titanium-specialist manufacturing resources. Capabilities include CNC milling, turning, drilling, and multi-axis machining. We can work from your CAD drawings or samples to produce finished or semi-finished parts to your specifications.
Shipping & Logistics
Do you ship internationally?
Yes, we ship to customers worldwide. Our primary export markets include North America, Europe, Southeast Asia, the Middle East, and Australia. We work with established freight forwarders experienced in handling titanium products and can arrange delivery by sea, air, or express courier depending on urgency and volume.
How is titanium packaged for shipping?
Titanium products are carefully packaged to prevent surface damage and contamination during transit. Standard packaging includes plastic film wrapping, cardboard protection, and wooden crates or pallets for sea freight. For precision-machined parts, we use custom foam inserts and sealed packaging. All packaging meets international shipping and fumigation requirements.
What is the typical lead time from order to delivery?
For standard products in stock, we can ship within 3–7 business days. Custom production orders typically require 15–30 days depending on the specification and quantity. International shipping adds 15–35 days by sea or 5–7 days by air. We provide order tracking and keep you updated throughout the process.
Do you handle export documentation?
Yes, we handle all necessary export documentation including commercial invoice, packing list, bill of lading, certificate of origin, and fumigation certificate. We can also provide documentation required for customs clearance in your country. Our logistics team has extensive experience with international titanium trade compliance.
About Titanium Seller
Where is Titanium Seller located?
Our partner network is located in a titanium production cluster that accounts for roughly 60% of China's titanium output. Learn more on our About page.
Who is Titanium Seller?
Titanium Seller is an integrated titanium supply-chain platform working with certified partner facilities. Through our partner network, we cover melting, forging, bar and wire rolling, foil and strip rolling, seamless tube production and machining, under one contract. Titanium Seller is the single contracting party on every order: quality, delivery, documentation and claims stay our responsibility, so you deal with one contract and one point of contact.
Where is your partner network located?
Our partner network is located in a titanium production cluster that accounts for roughly 60% of China's titanium output.
Do you rely on a single partner facility?
No. Our platform works with certified partner facilities covering melting and forging, bar and wire rolling, foil and strip rolling, seamless tube production, MMO anodes, filters and machining, all through our partner network. Every order follows an inspection plan confirmed at quotation, with applicable approvals stated on the quotation before you place the order.
How do you ensure quality control?
Material is inspected for appearance and dimensions before release; chemical composition and mechanical properties are tested and reported on the certificate. Incoming blanks and semi-finished stock are inspected on receipt, and heat/lot number traceability is maintained. Our QC team checks dimensions, surface quality, marking, and documentation. Independent third-party re-testing can be arranged on request. Contact us to learn more about our quality assurance process.
Still Have Questions?
Our team is ready to help with any questions about titanium grades, specifications, pricing, or custom orders. Get in touch and we will respond within 24 hours.
Contact Us