Type something to search...
🎯

Titanium Grade Selector

Find the right titanium grade for your application. Compare strength, corrosion resistance, and cost across all major grades.

Select the optimal titanium grade for your service conditions by filtering across mechanical strength, chloride/acid corrosion media, operating temperature (-253°C cryogenic to 400°C+), weldability, and target specification (ASTM B265, B338, B348, B381, AMS 4928, ASTM F136).

Recommended Grades

Grade 4(Commercially Pure (High Strength))BEST MATCH
100%
Balanced strengthModerate pricing

Typical applications: airframe, fasteners, cryogenic vessels

Grade 9(Near-α Alloy (Ti-3Al-2.5V))
100%
Balanced strengthModerate pricing

Typical applications: aerospace hydraulic tubing, bicycle frames, offshore oil & gas

Grade 12(Near-α (Ti-0.3Mo-0.8Ni))
100%
Balanced strengthModerate pricing

Typical applications: heat exchangers, chemical processing, oil & gas sour service, marine

Grade 2(Commercially Pure)
91%
Balanced strength

Typical applications: chemical processing, marine, heat exchangers, desalination

Grade 7(CP + Pd (Enhanced Corrosion Resistance))
91%
Balanced strength

Typical applications: chemical processing, severe reducing acid environments

Grade 1(Commercially Pure)
73%

Typical applications: chemical processing, marine, deep drawing, anodes

Grade 5(α+β Alloy (Ti-6Al-4V))
73%

Typical applications: aerospace structures, engine components, landing gear, medical implants, marine

Grade 23(α+β ELI (Ti-6Al-4V ELI))
73%

Typical applications: medical implants, spinal fixation, hip stems, dental implants

Discuss Your Grade Selection with Our Engineers →

How to Use the Titanium Grade Selector for Engineering Procurement

1. Start with the primary design driver: If chloride or oxidizing acid corrosion resistance with extensive field welding is the main requirement (heat exchangers, desalination piping, reactors), commercially pure Grade 2 (UNS R50400) covers over 70% of industrial chemical equipment at the lowest material cost.

2. Evaluate crevice and reducing acid risks: When brine temperatures exceed 80°C in tight flange or gasket crevices, upgrade from Grade 2 to Grade 12 (Ti-0.3Mo-0.8Ni) for a cost-effective step-up, or to palladium-stabilized Grade 7 (Ti-0.15Pd) for severe reducing HCl/H2SO4 condensates.

3. Match structural and medical certifications: For high-stress rotating shafts, aerospace brackets, or subsea fasteners requiring >= 895 MPa tensile strength, select Grade 5 (Ti-6Al-4V). For surgical implants or cryogenic vessels requiring extra-low interstitials (O <= 0.13%) and maximum fracture toughness, specify Grade 23 (Ti-6Al-4V ELI per ASTM F136 / AMS 4930).

Need Exact Mill Pricing or Custom Machining per Drawing?

Send your dimensions or CAD files (STEP, DXF, PDF) for a formal FOB/CIF quote within 24 hours.

Engineering & Procurement FAQ

When should I choose Grade 2 over Grade 5 (Ti-6Al-4V) titanium?
Choose Grade 2 (CP Titanium) for heat exchangers, piping, tanks, and chemical process vessels where seawater or chloride corrosion resistance, cold formability, and multi-pass TIG weldability are the primary requirements. Choose Grade 5 (Ti-6Al-4V) when high tensile strength (895+ MPa), fatigue endurance, or high strength-to-weight ratio is required in aerospace, motorsport, offshore stress joints, or precision CNC components.
What is the difference between Grade 7 and Grade 12 for crevice corrosion?
Both grades resist hot chloride crevice corrosion above 80°C where unalloyed Grade 2 can suffer localized attack. Grade 12 alloys 0.3% Mo and 0.8% Ni at roughly 15–25% above Grade 2 cost, making it ideal for hot brine and sour gas (NACE MR0175). Grade 7 adds 0.12–0.25% Palladium (Pd), providing the highest resistance to reducing acids and severe crevices, though Pd content makes it significantly more expensive.
Which titanium grade is best for high-pressure hydraulic and heat exchanger tubing?
Grade 2 is the standard choice for low-to-medium pressure shell-and-tube heat exchangers per ASTM B338. When higher internal pressure ratings and weight reduction are needed—such as aircraft hydraulic lines or high-pressure offshore heat exchangers—Grade 9 (Ti-3Al-2.5V) offers roughly 80% higher yield strength than Grade 2 while retaining good cold-pilgering tube formability and weldability.

Ready to Start Your Project?

Send your drawing or specification and we will reply within 24 hours.

Get a Quote
Quick Inquiry
WhatsApp