Titanium Corrosion Resistance Lookup
Check how different titanium grades perform in specific chemical environments — acids, seawater, and process chemicals.
Look up corrosion compatibility and maximum safe temperature limits for Commercially Pure Titanium (Grade 2), Ti-6Al-4V (Grade 5), Ti-Pd (Grade 7), and Ti-Mo-Ni (Grade 12) across oxidizing, neutral chloride, and reducing chemical environments.
| Concentration | Temp | Grade 1 | Grade 2 | Grade 5 | Grade 7 | Grade 12 |
|---|---|---|---|---|---|---|
| ≤1% | 25 °C | B | B | B | A | A |
| ≤1% | 60 °C | C | C | C | B | A |
| 5% | 25 °C | D | D | D | C | B |
| 10% | 25 °C | D | D | D | D | C |
Excellent — corrosion rate < 0.025 mm/yr, recommended
Good — corrosion rate 0.025–0.125 mm/yr, suitable with monitoring
Fair — corrosion rate 0.125–0.5 mm/yr, limited use, consider upgrade
Not recommended — corrosion rate > 0.5 mm/yr
Quick Overview — All Media
Understanding Titanium's Oxide Film & Chemical Compatibility
1. Oxidizing vs. Reducing Environments: Titanium owes its corrosion immunity to a self-healing 2–10 nm Titanium Dioxide (TiO2) passive film. In seawater, brines, hypochlorites, wet chlorine gas (>0.5% moisture), and nitric acid (HNO3), this oxide layer reforms instantaneously (<0.005 mm/yr corrosion rate). In anhydrous (dry) chlorine gas or uninhibited reducing acids (HF, concentrated HCl/H2SO4), the oxide film breaks down.
2. Temperature & Concentration Thresholds: Even dilute hydrochloric (HCl) or sulfuric (H2SO4) acid accelerates attack once temperature rises above 35–50°C on Grade 2. Adding oxidizing ions (such as Fe³⁺, Cu²⁺, or HNO3 traces) or switching to Grade 7 (0.15% Pd) shifts the passivation potential and extends safe acid handling significantly.
3. Crevice Corrosion Rule of Thumb: In neutral chloride brines (pH 3–10), crevice attack on Grade 2 only becomes a concern when temperature exceeds 75–80°C inside tight metal-to-PTFE or metal-to-metal gasket joints. For >80°C brine exchangers, specify Grade 12 or Grade 7 tube sheets and tubes.
Need Exact Mill Pricing or Custom Machining per Drawing?
Send your dimensions or CAD files (STEP, DXF, PDF) for a formal FOB/CIF quote within 24 hours.