Type something to search...
📏

Titanium Tolerance Calculator

Look up ASTM B265, B348, and B338 standard tolerances for titanium sheets, bars, and tubes by dimension.

Verify standard dimensional tolerances in metric (mm) and imperial (inches) per ISO 286-2 (centerless-ground shaft tolerances h6–h9), ASTM B265 (sheet, strip, and plate), and ASTM B338 (seamless and welded heat exchanger tubes).

Standard: ASTM B265

Available Ranges

0.4–0.6 mm±0.05 mm
0.6–1.0 mm±0.08 mm
1.0–2.0 mm±0.10 mm
2.0–3.0 mm±0.15 mm
3.0–5.0 mm±0.20 mm
5.0–8.0 mm±0.30 mm
8.0–12.0 mm±0.40 mm
12.0–20.0 mm±0.60 mm
20.0–40.0 mm±0.80 mm
40.0–60.0 mm±1.20 mm
60.0–100.0 mm±1.50 mm
Enter a dimension to look up ISO 286 / ASTM tolerances in mm and inches.
Need Tighter Tolerances? Contact Us →

Mill Tolerance Standards vs. Precision Ground Stock

1. ISO 286-2 Ground Bar vs. ASTM B348 Mill Bar: Hot-rolled or peeled bars follow ASTM B348 size tolerances, whereas precision Swiss-turning bars are centerless-ground to ISO 286-2 unilateral minus tolerances (h6, h7, h8, h9 — upper deviation 0). Specific tolerance and straightness requirements are evaluated per drawing.

2. ASTM B265 Sheet & Plate Gauge Tolerances: Cold-rolled sheet (<4.75 mm) carries tighter thickness tolerances than hot-rolled plate (>= 5.0 mm). When tighter thickness or flatness is required for CNC fixture clamping, surface-ground or 6-side milled blanks can be requested per drawing.

3. ASTM B338 Tube OD & Wall Variations: Seamless and welded heat exchanger tubes are controlled on both Outside Diameter and Wall Thickness (% of nominal WT) to ensure proper fit-up for tube-to-tubesheet rolling and welding.

Need Exact Mill Pricing or Custom Machining per Drawing?

Send your dimensions or CAD files (STEP, DXF, PDF) for a formal FOB/CIF quote within 24 hours.

Engineering & Procurement FAQ

Why are ISO 286 h6, h7, h8, and h9 bar tolerances unilateral (0 / minus) instead of bilateral (±)?
Under ISO 286-2, shaft tolerance classes with lowercase letter 'h' have a fundamental upper deviation of zero (0) and a negative lower deviation (for example, Ø10 mm h7 is +0 / -0.015 mm). This ensures the bar never exceeds nominal diameter, allowing smooth feeding through CNC Swiss lathe guide bushings and collets. Specific ground bar tolerances are evaluated per drawing and order.
What is the thickness tolerance for ultra-thin titanium foil vs. ASTM B265 sheet?
Standard ASTM B265 cold-rolled sheets (0.4–4.75 mm) carry thickness tolerances of ±0.05 mm to ±0.20 mm. Ultra-thin cold-rolled titanium foil down to 0.005 mm (5 µm) is rolled on 20-high Sendzimir mills, with thickness and slit-width tolerances confirmed per order.
How is flatness specified on titanium plates for CNC machining?
Standard mill-finish titanium plate follows ASTM B265 flatness tables. If your CNC setup or vacuum chuck requires tighter flatness or parallel faces, you can select surface-ground or 6-side milled blanks in the quote form for evaluation per drawing.

Ready to Start Your Project?

Send your drawing or specification and we will reply within 24 hours.

Get a Quote
Quick Inquiry
WhatsApp