Decision Support
Titanium Material & Grade Comparison Guides
Side-by-side engineering property comparisons for mechanical designers, corrosion engineers, and B2B buyers. Evaluate tensile and yield strength, density, chloride pitting thresholds, weldability, and cost trade-offs before finalizing your bill of materials.
Material vs Material
Titanium (Grade 5) vs Stainless Steel (316L)
Compare 4.43 vs 7.99 g/cm³ density, 895+ MPa vs 485 MPa tensile strength, and seawater chloride pitting immunity.
View comparison →Titanium (Grade 5) vs Aluminum (7075-T6)
Evaluate specific strength, 10⁷ high-cycle fatigue endurance, CFRP galvanic compatibility, and >120°C thermal limits.
View comparison →Titanium (Grade 5) vs Inconel 625
Analyze the 47.5% weight reduction and per-part volume cost advantage of titanium below 400°C vs nickel superalloys.
View comparison →Grade vs Grade
Grade 2 (CP Titanium) vs Grade 5 (Ti-6Al-4V)
Choose between cold-formable, field-weldable CP Grade 2 for chemical heat exchangers and 895 MPa Grade 5 for structural parts.
View comparison →Grade 5 (Ti-6Al-4V) vs Grade 23 (Ti-6Al-4V ELI)
Understand how Extra Low Interstitials (O <= 0.13%) boost fracture toughness for ASTM F136 medical implants and cryogenics.
View comparison →CP Titanium (Grade 1-4) vs Titanium Alloys (Grade 5, 9, 23)
Compare single-phase alpha unalloyed grades (1–4) against alpha-beta and palladium-enhanced titanium alloys.
View comparison →How to Evaluate Material Trade-Offs for Titanium RFQs
When comparing titanium against stainless steel, aluminum, or nickel superalloys, comparing raw price per kilogram alone is misleading. Because titanium's density (4.43–4.51 g/cm³) is roughly 44% lower than 316L stainless steel (7.99 g/cm³) and 47% lower than Inconel 625 (8.44 g/cm³), a single kilogram of titanium produces nearly twice as many machined parts or heat exchanger tubes of identical wall thickness.