AM Feedstock Titanium Bars & Wires for Powder Atomization
Titanium Feedstock for Powder Atomization and Wire-Arc AM
In spherical powder production, the chemistry of the bar or wire going into the atomizer sets the ceiling for the powder coming out. Atomization adds oxygen; it never removes it. Starting from standard industrial bar — which ASTM B348 allows up to 0.20% O for Grade 5 — leaves little headroom before powder or reused powder approaches the oxygen limits in ASTM F3001 (Ti-6Al-4V ELI for powder bed fusion).
Titanium Seller supplies low-interstitial feedstock bars and wires through a qualified partner mill in Baoji whose product line is built for atomizers and wire-arc printers. The guaranteed chemistry, melting route and inspection scope are written into your purchase order and reported on the mill test certificate (MTC) — not taken from a brochure.
Product Range
1. Feedstock Bars for EIGA and PREP
| Item | Standard offer |
|---|---|
| Grades | Ti-6Al-4V (Grade 5), Ti-6Al-4V ELI (Grade 23), TA15, CP Grade 1; other grades on request |
| Diameters | Φ30, Φ50, Φ60 mm |
| Lengths | 510, 800, 1000 mm |
| End preparation | Flat, threaded, or tapered (cone) — to suit your atomizer chuck |
Other diameters, lengths, straightness, surface finish and runout limits are quoted against your atomizer drawing.
2. Feedstock Wire for Plasma Atomization and WAAM
| Item | Standard offer |
|---|---|
| Grades | Ti-6Al-4V (Grade 5), Ti-6Al-4V ELI (Grade 23), TA15, CP Grade 1 |
| Diameters | Φ0.8, 1.2, 1.6, 3.175, 4.0, 4.76 mm |
| Unit weight | 1 kg, 10 kg, 100 kg |
| Packaging | Hollow coil, plastic spool, I-spool |
| Straightness | Free-uncoiled wire lies within 8 mm per metre (mill figure) |
Chemistry and Lot Control
The partner mill focuses this product line on four points:
- Low gas interstitials — oxygen and nitrogen are held well below general-purpose bar. Because the achievable limit depends on grade, sponge lot and melting route, the guaranteed O / N / H maximums are agreed per order and reported on the MTC.
- Tight Al / V / Fe control — narrow alloying bands for consistent powder chemistry from lot to lot; the guaranteed band is stated per order.
- Large same-grade lots — up to 6 t of one grade in a lot, which reduces lot-to-lot qualification work for powder producers.
- Stock of common grades — the mill keeps more than 20 t of commonly used grades in total; availability of a specific grade and size is confirmed at quotation.
Melting is by vacuum arc remelting (VAR). The number of remelts follows your specification and is stated on the MTC.
Testing Available
The partner mill’s laboratory covers the checks feedstock buyers usually ask for:
- O / N / H analysis by inert gas fusion
- Chemical analysis by ICP spectrometry
- Tensile testing, metallography and micro-Vickers hardness
- Rotary ultrasonic inspection of bars
Which tests are run, at what sampling frequency and to which acceptance class is fixed in the purchase order. Where your quality system requires an aerospace- or medical-certified execution mill, the certificate number, scope and site address are provided with the quotation.
How to Request a Quote
Send the grade, form (bar or wire), size, quantity, target process (EIGA, PREP, plasma atomization or WAAM) and your interstitial limits. We will reply with the confirmed chemistry limits, test plan, packaging and lead time for that order.
Request a Quote for This Product
Send your drawing or specification and we will reply within 24 hours.
Quick Contact
Quality Assurance
- ✓ Material Test Certificate (MTC) with Every Order
- ✓ ASTM / ASME / AMS Standard Compliance
- ✓ Third-party Inspection Available
Related Products
-
Titanium Rods
Titanium Rods