Type something to search...
📦 Looking for Titanium Sheets & Plates specs, grades & pricing?
View Full Product Page →
Surface-Ground Grade 5 Titanium Knife Scale & Frame-Lock Blanks

Surface-Ground Grade 5 Titanium Knife Scale & Frame-Lock Blanks

Precision Surface-Ground Titanium Stock for Folding Knives & EDC

In high-precision Knife Making & Custom EDC production, bearing pocket parallelism and lockbar geometry leave no room for raw mill-plate distortion. Through our certified partner facilities, we supply double-side precision surface-ground Grade 5 (Ti-6Al-4V / UNS R56400 / Werkstoff 3.7165 / ВТ6) sheet strips, squared blocks, and cold-waterjet near-net blanks tailored for custom makers and production CNC shops.


Why As-Rolled Mill Sheet Fails on Frame Locks & Liner Locks

Machining folding knife handles directly from raw hot-rolled or pickled mill sheet creates two immediate shop-floor problems:

  1. Residual Stress & Lockbar Spring-Back: Hot-rolled titanium sheet carries asymmetric surface tension locked into its outer skins. As soon as you pocket out weight-relief cavities or slit the frame-lock relief cutout (0.8–1.2 mm / 0.031"–0.047" web thickness), unbalanced internal stress releases — causing the scale or lockbar to bow upward or twist. Even slight warpage destroys bearing raceway parallelism and causes blade centering drift and lock stick.
  2. Hard Alpha-Case Skin Chipped on Micro-Tooling: Raw mill surfaces often retain trace oxygen-enriched alpha case that rapidly chips miniature carbide ball mills, thread mills, and chamfer cutters during 3D contouring.

Double-Side Wet Surface Grinding & Cold Waterjet Profiling

Through our Surface-Ground & 6-Side Milled Blanks workflow, raw ASTM B265 sheet is stress-relieved and finished using symmetrical double-side flood-cooled wet surface grinding:

  • Balanced Skin Removal: Equal stock is ground off both the top and bottom faces under heavy coolant flood, removing the brittle mill skin evenly without introducing grinding heat. When you machine deep internal pockets or cut the lockbar slot, the blank stays calm on the fixture.
  • Ready for Vacuum Chucks & Soft Jaws: Clean, oxide-free parallel faces seat flush on vacuum plates or multi-station vises without shimming. Flatness, parallelism, and thickness tolerances are confirmed per drawing and order specification.
  • Cold Waterjet Near-Net Knife Blanks: To save spindle hours, ground sheets can be routed through Titanium Water Jet Cutting to produce near-net-shape handle scales, backspacers, and pocket clips with undersized pivot holes — completely free of thermal HAZ or laser edge hardening.

Standard Knife Maker & EDC Thickness Reference

Metric GaugeImperial EquivalentTypical Knife & EDC Application
1.6 mm & 2.0 mm0.063" & 0.080"Inset liner locks, slipjoint liners, milled pocket clips, thin EDC scales
2.5 mm & 3.2 mm0.100" & 0.125" (1/8")Gentlemen’s frame-lock scales, lightweight folders, pry bars
3.5 mm & 4.0 mm0.140" & 0.160"Standard heavy-duty frame-lock handles, contoured 3D scales, backspacers
4.8 mm & 6.35 mm0.187" (3/16") & 0.250" (1/4")Deep-contoured scales, heavy tactical folders, multi-tool frames

Rolling Grain Direction & Single Heat Lot Control

Two metallurgical details separate production-grade knife stock from generic surplus titanium:

  • Marked Longitudinal Rolling Grain Direction: Titanium sheet exhibits distinct mechanical anisotropy between its longitudinal rolling direction and transverse cross-grain direction. Every ground strip or waterjet blank is explicitly marked with its Rolling Grain Direction so you can orient the frame-lock bar parallel to the grain — ensuring consistent spring modulus, smooth lockbar bend tuning, and high fatigue life across every knife in a run.
  • Single Heat Lot for Uniform Type III Anodizing: Slight variations in aluminum and vanadium chemistry between different mill melts cause noticeable shade shifts during electrochemical color anodizing. We supply each batch from a single traceable heat lot, ensuring your show-side scale, lock-side scale, backspacer, and clip anodize to the exact same color at a given voltage. Preview voltage-to-color behavior with our Anodizing Voltage & Color Explorer or specify finished Titanium Anodizing & Bead Blasting.

Quality Documentation & Ordering

Every order ships with a Material Test Certificate (MTC) with heat-lot traceability and Certificate of Conformance (CofC). Dimensional tolerances, surface roughness (Ra), and lead times are confirmed per drawing and order specification.

Request a Quote for Surface-Ground Knife Scale Blanks →

Request a Quote for This Product

Send your drawing or specification and we will reply within 24 hours.

Get a Quote
Quick Contact

Reply within 24 hours 🔒 NDA available on request — your drawings stay confidential 📦 Small quantities ship as LCL; larger orders ship as full containers for simpler loading and customs inspection.

WhatsApp
Quality Assurance
  • ✓ Material Test Certificate (MTC) with Every Order
  • ✓ ASTM / ASME / AMS Standard Compliance
  • ✓ Third-party Inspection Available
Request MTC / Test Report
Related Products

Ready to Start Your Project?

Send your drawing or specification and we will reply within 24 hours.

Get a Quote
Quick Inquiry
WhatsApp