Type something to search...
📦 Looking for Titanium Tubes specs, grades & pricing?
View Full Product Page →
Titanium Exhaust Tubing & Laser-Cut Pie Cuts (Grade 1 & Grade 2)

Titanium Exhaust Tubing & Laser-Cut Pie Cuts (Grade 1 & Grade 2)

Thin-Wall Titanium Exhaust Tubing & Weld-Ready Pie Cuts

Building a titanium motorsport exhaust system requires tubing that forms cleanly without splitting, welds with a calm puddle, and survives high-frequency thermal cycling without cracking. Through our certified partner facilities, we supply thin-wall commercially pure titanium exhaust tubing and rotary-laser-cut pie cuts engineered specifically for Motorsport & Exhaust Fabrication.


Why CP Grade 1 / Grade 2 and 1.0–1.2 mm (0.039”–0.047”) Wall?

For custom headers, downpipes, and cat-back systems, alloy selection and wall thickness dictate both fabrication speed and track durability:

  • Why Commercially Pure Grade 1 & Grade 2: CP Grade 1 (UNS R50250 / Werkstoff 3.7025 / ВТ1-00) offers the highest elongation and ductility for tight mandrel bends, slip-joint swaging, and collector flaring without work-hardening cracks. CP Grade 2 (UNS R50400 / Werkstoff 3.7035 / ВТ1-0) provides higher yield strength for straight mid-pipes, muffler canisters, and underbody runs while maintaining smooth, predictable weld pool fluidity during back-purged TIG welding.
  • The 1.0–1.2 mm (0.039”–0.047”) Wall Sweet Spot: Paper-thin 0.8 mm (0.031") tubing saves weight on drag-spec builds but demands extreme heat control and can fatigue under high-RPM harmonic vibration. Conversely, 1.0 mm (0.039") and 1.2 mm (0.047") walls provide the ideal structural balance — cutting weight by roughly 45% compared to stainless steel while resisting exhaust gas thermal shock and weld-toe cracking. You can compare exact tube mass per meter or foot using our Weight & Allowance Calculator.

Standard Exhaust Tubing Size Matrix

Imperial ODMetric ODStandard Wall ThicknessesAvailable Formats
1.50” & 1.75”38.1 mm & 44.5 mm1.0 mm (0.039"), 1.2 mm (0.047")Straight lengths, mandrel bends, laser pie cuts
2.00” & 2.50”50.8 mm & 63.5 mm1.0 mm (0.039"), 1.2 mm (0.047")Straight lengths, mandrel bends, laser pie cuts
3.00”76.2 mm1.0 mm (0.039"), 1.2 mm (0.047")Straight lengths, mandrel bends, laser pie cuts
3.50” & 4.00”88.9 mm & 101.6 mm1.0 mm (0.039"), 1.2 mm (0.047"), 0.8 mm (0.031")Straight lengths, laser pie cuts, merge cones

Ultrasonically Cleaned & Individually Sealed Pie Cuts

Any fabricator who has built a complex twin-turbo titanium exhaust knows that bandsaw-cutting, belt-sanding, deburring, and acetone-wiping 200 individual pie-cut rings takes longer than welding the exhaust itself. Residual hydrocarbon oils or microscopic burrs left inside the tube cause instant porosity, gray oxide contamination, and embrittlement in a titanium TIG weld.

Through our partner network’s multi-axis rotary Titanium Laser Cutting lines, every pie cut and coped tube joint follows a strict four-stage weld-prep protocol:

  1. High-Purity Argon Rotary Laser Cutting: Multi-axis fiber lasers cut 4.5°, 9°, and 15° miter segments with zero mechanical clamping distortion or ovality, shielded by high-purity argon so the cut face remains bright and free of alpha case.
  2. Inner & Outer Edge Deburring: Both ID and OD edges are mechanically dressed so segments sit flush with zero gap during tacking and autogenous fusion welding.
  3. Ultrasonic Degreasing Bath: All segments are ultrasonically cleaned in multi-stage baths to strip away any trace of mill lubricants, handling oils, and particulates.
  4. Individually Sealed Packaging: Dried segments are sealed in individual protective bags by size and angle. Welders can tear open a pack at the bench, fixture the rings on the purge mandrel, and weld immediately out of the bag.

Matching CNC-Machined Exhaust Hardware

To keep your entire fabrication BOM under one traceable heat-lot package, we supply matching components produced via Titanium CNC Machining:

  • CNC-Turned V-Band Flanges: Male/female interlocking V-band rings in Grade 2 (UNS R50400 / 3.7035 / ВТ1-0) and Grade 5 (Ti-6Al-4V / UNS R56400 / Werkstoff 3.7165 / ВТ6) matched to 2.0" (50.8 mm) through 4.0" (101.6 mm) tubing.
  • O2 Sensor Bungs (M18×1.5): Stepped and saddle-radiused wideband lambda bosses in CP Grade 2 for distortion-free fillet welding.
  • Laser-Cut 2-Bolt / 3-Bolt Flanges & Head Flanges: Cut from 8.0–12.7 mm (0.315"–0.500") plate per your CAD/DXF port geometry.
  • Solid Titanium Exhaust Hanger Rods: Ø 8.0 mm (0.315"), Ø 9.5 mm (0.375"), and Ø 12.7 mm (0.500") Grade 2 rod with formed barb ends.

Quality Documentation & Ordering

Every shipment includes a Material Test Certificate (MTC) with heat-lot traceability and Certificate of Conformance (CofC) verifying chemical composition (including low interstitial O, N, C, H levels critical for weld ductility) and mechanical properties. Dimensional tolerances and delivery schedules are confirmed per drawing and order specification.

Request a Quote for Exhaust Tubing & Weld-Ready Pie Cuts →

Request a Quote for This Product

Send your drawing or specification and we will reply within 24 hours.

Get a Quote
Quick Contact

Reply within 24 hours 🔒 NDA available on request — your drawings stay confidential 📦 Small quantities ship as LCL; larger orders ship as full containers for simpler loading and customs inspection.

WhatsApp
Quality Assurance
  • ✓ Material Test Certificate (MTC) with Every Order
  • ✓ ASTM / ASME / AMS Standard Compliance
  • ✓ Third-party Inspection Available
Request MTC / Test Report
Related Products

Ready to Start Your Project?

Send your drawing or specification and we will reply within 24 hours.

Get a Quote
Quick Inquiry
WhatsApp