Type something to search...
📦 Looking for Nuts and Bolts specs, grades & pricing?
View Full Product Page →
Imperial (UNC / UNF) & Metric Titanium Fasteners, Studs & Custom Hardware

Imperial (UNC / UNF) & Metric Titanium Fasteners, Studs & Custom Hardware

Bridging the Imperial (UNC / UNF) & Custom Titanium Fastener Gap

For North American and global OEMs, sourcing metric titanium bolts is straightforward — but finding true Imperial Unified National Coarse (UNC) and Unified National Fine (UNF) titanium fasteners often means facing distributor stockouts, excessive distributor markups, or being forced to re-tap American assemblies to metric threads.

Through our certified partner facilities, we supply both standard ASME/ISO fastener geometries and custom print-machined titanium hardware across Imperial (#4-40 through 1"-8 / Ø 2.84–25.4 mm) and Metric (M1.6 through M36 / 0.063"–1.417") thread series.


Standard & Build-to-Print Fastener Families

We support production runs and specialty batches across four core engineering sectors:

  • For Motorsport & Exhaust Fabrication: High-strength Grade 5 (Ti-6Al-4V / UNS R56400 / Werkstoff 3.7165 / ВТ6) drilled-head hex flange bolts, double-end exhaust manifold studs (M8×1.25, M10×1.25, M10×1.5, 5/16"-18, 3/8"-16, 3/8"-24) paired with 12-point flange nuts, suspension shear bolts, and brake caliper bridge bolts.
  • For Knife Making & Custom EDC: Swiss-turned miniature hardware in #2-56, #4-40, #6-32, #8-32, #10-32, and M2–M5 threads — including custom Torx (T6 / T8 / T10) pivot barrels, collared pivot screws, stepped standoffs, thumb studs, and pocket clip screws with zero cam-out lobe geometry.
  • For Marine & Subsea Engineering: Seawater-immune Grade 2 (UNS R50400 / Werkstoff 3.7035 / ВТ1-0), Grade 5, and fracture-tough Grade 23 ELI (UNS R56407 / Werkstoff 3.7165-ELI / ВТ6С) heavy hex bolts, double-end pressure-housing studs (1/2"-13 to 1"-8 / M12 to M36), and ROV thruster fasteners.
  • For CNC Machine Shops & Industrial OEMs: Socket head cap screws (ASME B18.3 / DIN 912), countersunk flat head screws, captive panel screws, and custom shoulder bolts machined to your STEP/PDF drawing via Titanium CNC Machining.

Imperial UNC / UNF & Metric Thread Coverage

Thread SeriesStandard Size RangeEquivalent Shank DiameterTypical Fastener Styles
Imperial Micro & Instrument#2-56, #4-40, #6-32, #8-32, #10-24, #10-322.18–4.83 mm (0.086"–0.190")Torx knife pivot screws, standoffs, button & flat head screws
Imperial Medium (UNC / UNF)1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-246.35–9.53 mm (0.250"–0.375")Hex flange bolts, socket head cap screws, exhaust studs, 12-pt nuts
Imperial Heavy Structural7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 5/8"-11 up to 1"-811.11–25.4 mm (0.438"–1.000")Subsea flange studs, suspension bolts, heavy hex nuts & washers
ISO Metric (Coarse & Fine)M1.6, M2, M2.5, M3, M4, M5, M6, M8, M10, M12 up to M361.6–36.0 mm (0.063"–1.417")DIN 912 / ISO 4762 socket caps, DIN 6921 flange bolts, custom studs

Rolled Threads vs. CNC Turned / Thread-Milled Fasteners

Choosing the right manufacturing route depends on your fatigue requirements, head geometry, and batch volume:

  1. Cold Heading + Thread Rolling (High-Fatigue & Series Production): Rolling forms the thread profile by cold-displacing titanium wire or bar stock rather than cutting across the metallic grain flow. This leaves unbroken grain lines following the root contour and introduces compressive residual stress at the thread root — significantly increasing cyclic fatigue life under motorsport vibration or subsea preload.
  2. CNC Swiss Turning & Single-Point Threading / Thread Milling (Custom & Low-to-Mid Volume): When your drawing specifies non-standard shoulder lengths, captive undercuts, custom Torx sockets, or large-diameter studs (M16–M36 / 5/8"–1"), CNC turning and thread milling from centerless-ground bar deliver exact dimensional compliance without custom heading-die tooling costs.

Preventing Titanium Thread Galling (Anti-Galling Solutions)

Bare titanium-on-titanium threads are prone to friction-induced cold welding (galling) under high torque or repeated assembly. To prevent seized threads, we offer dedicated surface treatments through our Titanium Anodizing & Bead Blasting lines:

  • Type II Gray Anodizing: An electrochemical conversion layer that increases surface hardness, retains anti-seize lubricants (such as nickel, copper, or MoS₂ paste), and prevents bare metal-to-metal contact.
  • Type III Color Anodizing (15 V–110 V): Provides both part identification / aesthetic customization and a barrier oxide film for EDC hardware and motorsport dress-up kits.

Quality Documentation & Ordering

Every fastener batch is supplied with a Material Test Certificate (MTC) with heat-lot traceability and Certificate of Conformance (CofC). Thread fit classes (ASME B1.1 2A/2B or 3A/3B; ISO 6g/6H), dimensional tolerances, and delivery schedules are confirmed per drawing and order specification.

Request a Quote for Imperial UNC/UNF & Metric Titanium Fasteners →

Request a Quote for This Product

Send your drawing or specification and we will reply within 24 hours.

Get a Quote
Quick Contact

Reply within 24 hours 🔒 NDA available on request — your drawings stay confidential 📦 Small quantities ship as LCL; larger orders ship as full containers for simpler loading and customs inspection.

WhatsApp
Quality Assurance
  • ✓ Material Test Certificate (MTC) with Every Order
  • ✓ ASTM / ASME / AMS Standard Compliance
  • ✓ Third-party Inspection Available
Request MTC / Test Report
Related Products

Ready to Start Your Project?

Send your drawing or specification and we will reply within 24 hours.

Get a Quote
Quick Inquiry