Type something to search...
AMS Standard

AMS 4928 — Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes (Ti-6Al-4V, Annealed)

SAE AMS 4928 is the benchmark aerospace material specification for annealed 6Al-4V titanium alloy (Grade 5, UNS R56400) bars, wire, forgings, flash-welded rings, and stock for forging up to 152 mm (6.000 in.) section thickness.

Scope

Covers Ti-6Al-4V in annealed condition for aerospace structural applications.

Covered Grades

Covered Product Forms

Bar Wire Forging Ring

Key Requirements

  • Multiple consumables-electrode vacuum arc remelting (VAR)
  • Room-temperature tensile properties varying by section size (min 896 MPa UTS up to 50 mm)
  • Equiaxed or bimodal alpha-beta microstructure free of continuous alpha networks and alpha case
  • Ultrasonic inspection per AMS 2631 (Class A or Class AA as specified)

Test Methods

  • AMS 2631 (Ultrasonic)
  • ASTM E8 (Tensile)
  • ASTM E381 (Macroetch)
  • ASTM E1409 / E1447

Metallurgical Verification & Quality Control

Compared with commercial ASTM B348 Grade 5, AMS 4928 enforces stricter aerospace controls: mandatory multiple vacuum melting (VAR), documented beta-transus temperature on the MTC, metallographic verification of alpha-beta phase distribution, and size-dependent tensile/yield minimums across cross-sectional thicknesses.

What to Specify on Your AMS 4928 Purchase Order / RFQ

  • Specification and revision (e.g., AMS 4928; specify if stock is for machining or for subsequent forging)
  • Product form, diameter/section dimensions, and length
  • Ultrasonic inspection class per AMS 2631 (e.g., Class A1 or Class AA)
  • Surface finish: centerless ground or turned with complete removal of oxygen-enriched alpha case
  • Documentation: material test certificate (MTC) including melt practice, beta transus, microstructure statement, and UT report

Code Equivalency & Companion Standards

For flat-rolled Ti-6Al-4V aerospace sheet and plate, use AMS 4911. For extra-low-interstitial Ti-6Al-4V ELI bar and forging requiring enhanced cryogenic or fracture toughness, refer to AMS 4930.

AMS 4928 Specification & Procurement FAQ

What does AMS 4928 cover and which product forms are included?
AMS 4928 (Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes (Ti-6Al-4V, Annealed)) covers Ti-6Al-4V in annealed condition for aerospace structural applications. Covered product forms include Bar, Wire, Forging, Ring.
Which titanium grades are covered under AMS 4928?
AMS 4928 covers Grade 5 (Ti-6Al-4V). Every batch supplied by Titanium Seller under AMS 4928 ships with a material test certificate with heat/lot number traceability.
What testing and inspection methods are required by AMS 4928?
Key compliance requirements for AMS 4928 include multiple consumables-electrode vacuum arc remelting (var), room-temperature tensile properties varying by section size (min 896 mpa uts up to 50 mm), equiaxed or bimodal alpha-beta microstructure free of continuous alpha networks and alpha case, ultrasonic inspection per ams 2631 (class a or class aa as specified), verified using standard test methods: AMS 2631 (Ultrasonic), ASTM E8 (Tensile), ASTM E381 (Macroetch), ASTM E1409 / E1447.

Need material certified to AMS 4928?

Tell us grade, product form, and dimensions. We quote with a material test certificate (MTC) compliant with AMS 4928; the applicable standard edition and approvals are stated on the quotation. Quote within 24 hours.

Ready to Start Your Project?

Send your drawing or specification and we will reply within 24 hours.

Get a Quote
Quick Inquiry
WhatsApp