Type something to search...
ASTM Standard

ASTM B348 — Standard Specification for Titanium and Titanium Alloy Bars and Billets

ASTM B348 is the primary industrial specification governing wrought titanium and titanium alloy round bars, square bars, hexagonal bars, and forging billets.

Scope

Covers titanium and titanium alloy bars and billets for general corrosion resisting and elevated temperature service.

Covered Product Forms

Round Bar Hex Bar Square Bar Billet

Key Requirements

  • Chemical composition per grade
  • Room-temperature tensile properties (UTS, 0.2% yield, elongation, reduction of area)
  • Diameter, out-of-roundness, and straightness tolerances
  • Descaled, turned, peeled, or centerless ground surface free of seams and laps

Test Methods

  • ASTM E8 (Tensile)
  • ASTM E120 / E539 (Chemistry)
  • ASTM E1409 (Oxygen/Nitrogen)
  • ASTM E1447 (Hydrogen)

Metallurgical Verification & Quality Control

Bars supplied to ASTM B348 are produced from multiple-melted VAR ingots, hot forged or rolled with sufficient reduction ratio to ensure uniform wrought grain structure, and annealed. While B348 covers standard industrial bar stock, CNC machining and shaft applications often specify tighter diameter tolerances (ISO h6–h9) and 100% ultrasonic flaw detection.

What to Specify on Your ASTM B348 Purchase Order / RFQ

  • Standard and edition: ASTM B348 (or ASME SB-348)
  • Grade (e.g., Grade 2 for chemical shafts/fasteners, Grade 5 Ti-6Al-4V for high-strength mechanical parts)
  • Cross-section and size: diameter (or width across flats) × random or fixed cut length (mm)
  • Surface finish and tolerance: black forged, rough turned/peeled, or centerless ground & polished (e.g., h7/h8)
  • Inspection & certification: material test certificate (MTC), ultrasonic inspection standard, and third-party re-testing on request

Code Equivalency & Companion Standards

For aerospace structural applications requiring stricter microstructure control and mandatory AMS 2631 ultrasonic classes, compare ASTM B348 with AMS 4928. For surgical implants, refer to ASTM F136 (Grade 23 ELI) and ASTM F67 (CP Grades 1–4).

ASTM B348 Specification & Procurement FAQ

What does ASTM B348 cover and which product forms are included?
ASTM B348 (Standard Specification for Titanium and Titanium Alloy Bars and Billets) covers titanium and titanium alloy bars and billets for general corrosion resisting and elevated temperature service. Covered product forms include Round Bar, Hex Bar, Square Bar, Billet.
Which titanium grades are covered under ASTM B348?
ASTM B348 covers Grade 1, Grade 2, Grade 4, Grade 5, Grade 7, Grade 9, Grade 12, Grade 23. Every batch supplied by Titanium Seller under ASTM B348 ships with a material test certificate with heat/lot number traceability.
What testing and inspection methods are required by ASTM B348?
Key compliance requirements for ASTM B348 include chemical composition per grade, room-temperature tensile properties (uts, 0.2% yield, elongation, reduction of area), diameter, out-of-roundness, and straightness tolerances, descaled, turned, peeled, or centerless ground surface free of seams and laps, verified using standard test methods: ASTM E8 (Tensile), ASTM E120 / E539 (Chemistry), ASTM E1409 (Oxygen/Nitrogen), ASTM E1447 (Hydrogen).

Need material certified to ASTM B348?

Tell us grade, product form, and dimensions. We quote with a material test certificate (MTC) compliant with ASTM B348; the applicable standard edition and approvals are stated on the quotation. Quote within 24 hours.

Ready to Start Your Project?

Send your drawing or specification and we will reply within 24 hours.

Get a Quote
Quick Inquiry
WhatsApp