ASTM B265 — Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
ASTM B265 covers annealed titanium and titanium alloy strip, sheet, and plate for general corrosion-resisting and elevated-temperature industrial service.
Scope
Covers titanium and titanium alloy strip, sheet, and plate for general corrosion resisting and elevated temperature service.
Covered Product Forms
Key Requirements
- Chemical composition & interstitial limits per grade
- Room-temperature tensile properties (tensile, yield, elongation)
- Bend test ductility around specified mandrel diameter
- Thickness, width, length, and flatness permissible variations
- Descaled, pickled, or mill-annealed surface finish free of scale
Test Methods
- ASTM E8 (Tensile)
- ASTM E120 / E539 (Chemical Analysis)
- ASTM E1409 (Oxygen/Nitrogen)
- ASTM E1447 (Hydrogen)
- ASTM E29 (Rounding)
Metallurgical Verification & Quality Control
Under ASTM B265, each heat lot undergoes ladle and product chemical analysis (verifying iron, oxygen, carbon, nitrogen, and hydrogen limits) alongside transverse and longitudinal room-temperature tensile tests and bend tests. For heavy plate used in pressure vessels or tube sheets, supplementary ultrasonic examination (such as ASTM A578) and flatness tolerances are verified prior to dispatch.
What to Specify on Your ASTM B265 Purchase Order / RFQ
- Standard designation and edition (ASTM B265 or ASME SB-265)
- Grade (e.g., Grade 1 for deep drawing, Grade 2 for vessels, Grade 5 for structural plate, Grade 7/12 for severe crevices)
- Form and dimensions: thickness × width × length (mm or inch), standard mill sheet or waterjet/laser cut-to-size
- Surface condition: cold-rolled pickled (sheet) or hot-rolled annealed and pickled / sandblasted (plate)
- Required documentation: material test certificate (MTC), ultrasonic test report if applicable, and delivery terms (FOB China main port / CIF)
Code Equivalency & Companion Standards
ASME SB-265 is the ASME Boiler and Pressure Vessel Code (BPVC Section II Part B) adoption of ASTM B265 for pressure-retaining shells, heads, and tube sheets. When ordering for coded pressure vessels, specify ASME SB-265 and the applicable code edition on your purchase order.
ASTM B265 Specification & Procurement FAQ
What does ASTM B265 cover and which product forms are included?
Which titanium grades are covered under ASTM B265?
What testing and inspection methods are required by ASTM B265?
Related Specifications
Need material certified to ASTM B265?
Tell us grade, product form, and dimensions. We quote with a material test certificate (MTC) compliant with ASTM B265; the applicable standard edition and approvals are stated on the quotation. Quote within 24 hours.