Titanium (Grade 5) vs Aluminum (7075-T6) — Complete Comparison
Although 7075-T6 aerospace aluminum is 36% lighter by volume (2.81 g/cm³ vs. 4.43 g/cm³), Titanium Grade 5 (Ti-6Al-4V) provides 65% higher yield strength (828+ MPa vs. 503 MPa), a true high-cycle fatigue endurance limit (~510 MPa vs. ~159 MPa), and thermal stability up to 350–400°C.
| Property | Titanium (Grade 5) | Aluminum (7075-T6) |
|---|---|---|
| Density (g/cm³) | 4.43 | 2.81 ★ |
| Tensile Strength (MPa) | 895-1000 ★ | 572 |
| Yield Strength (MPa) | 828-910 ★ | 503 |
| Elastic Modulus (GPa) | 114 ★ | 71.7 |
| Max Service Temp (°C) | 350-400 ★ | 120 |
| High-Cycle Fatigue Limit (MPa) | ~510 ★ | ~159 |
| Corrosion Resistance | Excellent (bare metal) ★ | Moderate (requires anodizing/coating) |
| Cost per kg (USD/kg) | $22-38 | $8-15 ★ |
Choose Titanium (Grade 5) When
- ✓ Operating temperature exceeds 120°C
- ✓ High-cycle fatigue life (>10⁷ cycles) is critical
- ✓ Direct contact with carbon fiber (CFRP) structures
- ✓ Compact, high-torque actuator or aerospace fittings
Choose Aluminum (7075-T6) When
- ✓ Minimum mass in large, low-stress enclosures
- ✓ Ambient temperature (<100°C) non-corrosive service
- ✓ Rapid high-speed CNC hogging prototypes
- ✓ Strict material cost cap
Engineering Trade-Off Analysis: Titanium (Grade 5) vs. Aluminum (7075-T6)
Packaging Volume & Specific Strength: In compact mechanical joints—such as humanoid robot actuators, aircraft landing gear links, and motorsport suspension uprights—available envelope volume is fixed. Grade 5 titanium carries nearly double the load within the same cross-section as 7075-T6 aluminum.
Fatigue Endurance & Thermal Degradation: Aluminum alloys lack a true fatigue endurance limit and accumulate micro-damage under high-cycle vibration, while 7075-T6 over-ages and loses strength rapidly above 120°C. Ti-6Al-4V sustains 10⁷+ load cycles at ~510 MPa and operates continuously up to 350°C.
Galvanic Compatibility with Carbon Fiber (CFRP): Aluminum in direct contact with carbon fiber composites suffers rapid galvanic corrosion in humid or marine air. Titanium's electrochemical potential closely matches carbon fiber, making Ti-6Al-4V the aerospace standard for CFRP structural fasteners and bonded fittings.
Related Specifications, Grades & Mill Products
Not sure which material is right for your project?
Our engineers can recommend the optimal grade based on your specific application, environment, and budget requirements.