Titanium (Grade 5) vs Stainless Steel (316L) — Complete Comparison
Titanium Grade 5 (Ti-6Al-4V) delivers nearly double the tensile strength (895–1,000 MPa vs. 485–560 MPa) and more than triple the yield strength (828+ MPa vs. 170–290 MPa) of annealed 316L stainless steel while weighing 44% less (4.43 g/cm³ vs. 7.99 g/cm³).
| Property | Titanium (Grade 5) | Stainless Steel (316L) |
|---|---|---|
| Density (g/cm³) | 4.43 ★ | 7.99 |
| Tensile Strength (MPa) | 895-1000 ★ | 485-560 |
| Yield Strength (MPa) | 828-910 ★ | 170-290 |
| Elastic Modulus (GPa) | 114 | 193 ★ |
| Corrosion Resistance | Excellent (seawater, chlorides) ★ | Good (general, pits in warm chloride) |
| Cost per kg (USD/kg) | $22-38 | $3-6 ★ |
| Machinability | Requires rigid setup & high-pressure coolant | Easy ★ |
| Biocompatibility | Excellent (implant grade) ★ | Limited (nickel sensitization risk) |
| Weight-to-Strength (kN·m/kg) | ~205 (Superior) ★ | ~65 (Average) |
Choose Titanium (Grade 5) When
- ✓ Weight savings critical (aerospace, robotics, racing)
- ✓ Seawater, brine, or wet chloride exposure
- ✓ Medical implant and surgical applications
- ✓ Zero corrosion maintenance over 20–30 year lifecycle
Choose Stainless Steel (316L) When
- ✓ Initial material budget is primary constraint
- ✓ Mild atmospheric or non-chloride environments
- ✓ High elastic stiffness (200 GPa) is mandatory
- ✓ High-speed automated screw machining without specialized coolant
Engineering Trade-Off Analysis: Titanium (Grade 5) vs. Stainless Steel (316L)
Corrosion Immunity vs. Pitting Threshold: Austenitic 316L stainless steel relies on a chromium-oxide passive layer that suffers localized pitting, crevice corrosion, and chloride stress corrosion cracking (SCC) in warm seawater or brines above 50–60°C. Titanium forms a self-healing TiO2 oxide film that is completely immune to seawater pitting and marine atmosphere attack for 30+ years.
Strength-to-Weight & Stiffness Trade-Off: At 4.43 g/cm³, Grade 5 titanium reduces component mass by 44.5% compared to an identical geometry in 316L steel. Engineers replacing steel shafts or fasteners with titanium should account for titanium's lower elastic modulus (~114 GPa vs. ~193 GPa for 316L) when designing deflection-limited assemblies.
Machining & Total Lifecycle Economics: While 316L bar and plate cost less per kilogram upfront and machine faster with standard carbide inserts, titanium's 1.8x volume-per-kg yield and zero-replacement service life in marine, offshore, and chemical condensers routinely deliver a lower Total Cost of Ownership (TCO).
Related Specifications, Grades & Mill Products
Not sure which material is right for your project?
Our engineers can recommend the optimal grade based on your specific application, environment, and budget requirements.